SafetySeeds®
Innovation for construction
SSR ScissorSafe Removable Safety Anchorage
The SSR ScissorSafe anchorage system is a removable anchorage device for horizontal, vertical and overhead concrete applications and is a part of a personal fall arrest/work restraint system.
The SSR ScissorSafe system consists in 2 main components; The disposable plastic mould component is fixed to formwork system during the construction process and subsequently casted into the concrete structure. The removable anchorage device when fully inserted and locked into the plastic mould by a 10mm karabiner to UNE-362 provide a suitable anchorage point for fall arrest/work restraint purpose. The SSR ScissorSafe removable personal fall arrest anchorage is designed for use as an anchorage attachment of a personal fall arrest/work restraint system.
SSR ScissorSafe is 100% tested according EN 795:1997 (PPE against falls from height - anchor devices: requirements and testing. Class B), and unless otherwise stated it is properly to use for one person with a energy absorber lanyard under EN 355.
SSR ScissorSafe moulds installation
Establish pre-planned positions for the required anchorage points covering main fall risk areas -building perimeter/voids/staircase/lift shafts- one every 5m or one between columns. If it is possible, maintain 1m distance from any fall hazard as safety distance in order to reach the anchorage safely.
1.- Nail the discs onto the inside face of the formwork in its intended position before pouring concrete .
2.- Place the moulds over the discs and press until you hear click.
3.- Pour the concrete and vibrate normally. Respect curing times.
ScissorSafe moulds installation
IMPORTANT: Must be respected the distances to edges, anchorages separation, concrete thickness and minimum concrete strength described on product specifications on page 5 on user manual. SSR ScissorSafe anchorage system is not intended for use in lightweight concrete, hollow block or any other support material. When installing the mould horizontally onto columns, slabs or wall formwork it is recommended that the mould is wire tied to reinforcement steel to ensure it remains in position throughout the pour.
SSR ScissorSafe device installation
ScissorSafe device
ScissorSafe device installation
1.- After formwork removal introduce the safety anchorage device through the recess of the mould in unlocked position and push gently to twist the blades.
2.- Insert the hook of only 10 mm karabiner to UNE-362 through the eye of the device and lock the screwgate.
3.- Attach the snaphook of an approved Fall Arrest/Fall Restraint lanyard/Block to the locking karabiner and lock the screwgate.
4.- Give 2 sharp tugs on the connecting device to ensure that it is fully engaged and ready for use.
5.- The SSR ScissorSafe may now be used as an anchorage point for personal fall Arrest/Fall Restraint systems. To remove the anchorage, first disconnect all equipment from karabiner, then undo and disconnect the karabiner, twist the blades back pressing the release tabs inward and pull the device out. DO NOT use the ScissorSafe device on cracked concrete surfaces.
SSR ScissorSafe device installation
Supported Browsers for video watching: Firefox, Safari, Google Chrome, Opera, Ie9.
SSR ScissorSafe device installation
Supported Browsers for video watching: Firefox, Safari, Google Chrome, Opera, Ie9.
SSR ScissorSafe EN 795 Certification
SSR User instructions and product specifications
If you have any questions regarding the correct installation or use of this product please contact us in:
· SafetySeeds® Trademark. C/Pera Costa , 14, A 3. 08024, Barcelona, Spain
Contact Person:
Sales Manager;
Juan Casas, j.casas@safety-seeds.com / 0034 677 745 590
Sales Representative;
Nico Gomez, n.gomez@safety-seeds.com / 0034 616 842 141
· web site: www.safety-seeds.com / info@safety-seeds.com
You can also write your message here:
Thank you for contacting us!